How to configure device network settings on the Turntide Hub.
- Login and select System > Network from the Menu bar
- Select the Interfaces tab and com1 from the list
- Configure the interfaces as follows:
- Enabled = ON
- Port = leave as default
- Baud Rate = 38400 (varies based on connected device)
- Byte Size = 8 (varies based on connected device)
- Parity = N (varies based on connected device)
- Stop Bits = 1 (varies based on connected device)
- Readable = ON
- Writeable = ON
- Click Save button to finish
- Repeat steps 1 – 4 for com2 if required